Reply by Mike_D_S

  • Advertise with us

Posted on Performax drum sander conveyor belt not aligned...

View Mike_D_S's profile


596 posts in 2725 days

#1 posted 01-13-2019 04:40 PM

I know we’ve been talking about the conveyor belt, but I just noticed in the first pic you have the dust port necked down for a smaller shop vac connection.

This will work ok for small narrow boards and very light passes on bigger stuff, but if you really want to get the most out of the sander you’re going to need a minimum of a bigger shop vac with a 2 1/2” hose or go to a full DC setup with a 4” hose. Even one of the small portable 1 HP blowers will help if you don’t have a bigger setup.


-- No honey, that's not new, I've had that forever......

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics