LumberJocks

Reply by ibewjon

  • Advertise with us

Posted on Trash can collection

View ibewjon's profile

ibewjon

989 posts in 3299 days


#1 posted 01-13-2019 04:13 AM

What goes in must come out. How is the lid staying on? The cyclone lid is all over the internet for about $30, but it uses 4” piping. And it is normally placed before the collector to keep most material out of the fan and filter. Did you remove the bags and run pipe to garbage? What filters the chips and dust out? Are you trying to dump material into garbage can? I changed my old north state chip collector with bags to a modern collector by buying the jet pleated filter kit and added the jet chip deflector when it became available..now I have a DUST collector. I have 5” ducts with 4” taps to the machines. If I would dump the air outside, I could never heat my shop in winter or dehumidify it in the summer. Post a picture of your dust collector, not the trash can please, so we can better understand what you have set up.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com