Reply by MrUnix

  • Advertise with us

Posted on lathe quit

View MrUnix's profile (online now)


7478 posts in 2708 days

#1 posted 01-13-2019 01:18 AM

Like I told you last time – it makes no difference if the capacitor has wires, spade connectors, screws/nuts, soldered connections or any other type… just as long as you can get to both terminals with the probes of a meter. And there is no + or – marked on them, so that is not a problem either. Just disconnect one (or both) sides of the capacitor and test it with the meter probes as shown in the countless videos.

I would test the switch like Phil mentioned first though… as that is a more likely suspect.


-- Brad in FL - In Dog I trust... everything else is questionable

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics