LumberJocks

Reply by AlaskaGuy

  • Advertise with us

Posted on Rasied Panels for jeffdeluca56

View AlaskaGuy's profile

AlaskaGuy

5350 posts in 2815 days


#1 posted 01-12-2019 12:11 AM

Looks good, I used a 1’’ thick piece oak for my fence and believe that gave me a littler more material left after I dished out for the spindle. I’m sure yours will be fine. Now as long as your aluminum strip is straight and you make some kind of guard to protect your hands in case of a slip you should be good to go. After set up remember to check every thing to make sure it secure before you hit the on button.

Remember to be careful when setting up that the knifes on you cutter are very close to the aluminum bar so start a bit high and move down just until the panel edge with fit in to to sticking slot.

Let us know how it all works out. Safety First

-- Alaskan's for Global warming!


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com