LumberJocks

Reply by Ken Bryden

  • Advertise with us

Posted on Question about warped slab. PLEASE HELP

View Ken Bryden's profile

Ken Bryden

2 posts in 761 days


#1 posted 01-05-2019 04:58 AM

Dear Brut Design, Most of my wood looks like two-bladed propellers before I start. I would cut it into several lengths, plane them flat and then glue them back together. For each piece, use a planing sled such as a piece of heavy plywood, particle board or a bi-fold door. Using hot-glue, tack down the 2 touching diagonal ends then glue wedges along the board so the planer can’t push it down. Put it through the planer, and when one side is flat, knock it off the planing sled, and do the other side. When gluing everything back together, use biscuits every 12 in. Sand flat with a belt sander using a circular motion.
I hope this helps Ken, aka Pook ( A stupid nickname I’m going to change.)

http://lumberjocks.com/topics/192658#

-- West Van Ken


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com