Reply by skatefriday

  • Advertise with us

Posted on Remodel Woodworking - Cabinets, Built-ins, Doors

View skatefriday's profile


452 posts in 1997 days

#1 posted 12-31-2018 02:28 AM

If you have a few years to work on it.. sure it can be done.

I would consider more tooling (planer, joiner, cabinet or hybrid table saw, a couple festool or Mirka sanders (Dynabrades if you have enough air) two more routers (one cope, one sticking and a 3+hp for panels (assuming reverse raised like a proper shaker panel)

Then finishing, you will need some sort of spray setup something along the lines of a fuji 4 stage.

Then space for storage (and finishing)

- Jared_S

I ended up buying an Earlex HVLP sprayer after having to remake 4 drawer fronts due to a bad finish job. The Earlex did a satisfactory job.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics