LumberJocks

Reply by ravensrock

  • Advertise with us

Posted on Coffee table build questions

View ravensrock's profile

ravensrock

509 posts in 2180 days


#1 posted 12-28-2018 01:44 AM

Thanks for the ideas Rich. I’m thinking I’m screwed on the lift part too. I actually had the hardware but didn’t allow for the thickness of the side or the overhang when determining how wide it should be. Looks like I might need to do some careful cutting and gluing.

I was really hoping to be able to use the piano hinge. It wasn’t cheap at Rockler. I’m not familiar with an articulating chest hinge. Do you happen to have any links? Thanks in advance.


It looks like you re screwed on the part that lifts. I assume you built the table before you bought the hardware. Lesson learned.

For the other part, I d skip the piano hinge and go with an articulating chest hinge that will lift up as it opens and clear the sides.

- Rich


-- Dave, York, PA, Wildside Woodworking


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com