Reply by bilyo

  • Advertise with us

Posted on Meeting curved to straight mitered moulding

View bilyo's profile


959 posts in 1706 days

#1 posted 12-19-2018 11:46 PM

Your problem is that the radius of the curved piece is wrong. If your intent is to have a smooth transition at both ends, the radius must be such that the curve piece and the straight pieces must meet at the tangent points of the curve (circle segment). In doing this, your radius point will fall on the left side straight piece and be down from the top equal to the distance between the left and right straight pieces. You will then have a 45 degree cut at the top of the left piece and an 90 degree cut in the right one.

See next post.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics