LumberJocks

Reply by smitdog

  • Advertise with us

Posted on Wood drifts away from table saw fence at end

View smitdog's profile

smitdog

445 posts in 2711 days


#1 posted 12-19-2018 03:35 PM

Just for curiosity I’d try ripping a longer piece. It might be too easy for the 8” piece to follow imperfections in the fence face. If a longer board still has the issue then the problem may be elsewhere. Also, does the back of your fence clamp down or is it free to move? It could be slight variation in how much pressure you are putting against the fence depending on your hand position on the table. If the back of the fence can move ever so slightly then that could be accounting for your .005 difference as you push through the cut.

-- Jarrett - Mount Vernon, Ohio


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com