Reply by clin

  • Advertise with us

Posted on Wood drifts away from table saw fence at end

View clin's profile


1075 posts in 1598 days

#1 posted 12-18-2018 04:45 PM

Also since it s extruded aluminum, the fence dips a little in the very center by about 0.003”.

- bgilb

This caught my eye. If the fence is farther away in the middle, maybe what is happening is the wood bridges this dip through most of the cut, but then towards the end of the cut, the end of the board follows into the dip in the fence.

You might try clamping a board to the fence, much like you might attach a sacrificial fence. Shim the dip if needed. The idea is to have something that provides a straighter fence than what you have. See if that helps. You’ll at least know where your problem comes from.

-- Clin

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics