LumberJocks

Reply by jutsFL

  • Advertise with us

Posted on Protective coat over painted outdoor Adirondack chair?

View jutsFL's profile

jutsFL

198 posts in 694 days


#1 posted 12-14-2018 11:28 PM

Short of sanding and re-doing it, personally I’d go with a wipe on spar urethane. Get one of your choice, and either mineral spirits or turpentine – either is fine. Mix 50/50 spar to solvent. This will be your wipe on finish. Wipe on, dry for a couple hrs depending on conditions, repeat. Give it 3 coats and your done. Final dry for a day. You can light sand in between coats if you’d like, but to do so you’ll have to let each coat fully dry before sanding.

-- I've quickly learned that being a woodworker isn't about making flawless work, rather it's fixing all the mistakes you made so that it appears flawless to others! Jay - FL


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com