Reply by Brokenanew

  • Advertise with us

Posted on Bubbles NIGHTMARE! HELP!

View Brokenanew's profile


9 posts in 683 days

#1 posted 12-14-2018 03:00 AM

Awesome! Thanks for the feedback! I feel confident in trying again. I’m actually going to break out my router sled and plane it down. One because I did end up sanding to much now the stain is uneven and blotchy. Also, there were a few sanding marks show up after the stain so I kind wanted to go darker.

So I’m going to plane it down. I just hope I can plane enough before I hit any pocket hole screws. I’m fairly certain I’ll be fine. Then I’ll try your suggestions. I’ll put some space heaters in the shop. Warmer temps ( how warm 80°?), thin 50/50 instead 10/90, wipe on with foam applicator, and maybe apply shellac before the poly. Did Imiss anything.

Also, yes, I was going for lightly distressed. I wanted a few marks here and there. There’s more the camera doesn’t see but I like it.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics