Reply by Dustin

  • Advertise with us

Posted on What am I doing wrong? Can't assemble front fence rails on delta table saw 36-725

View Dustin's profile


707 posts in 1352 days

#1 posted 12-12-2018 02:23 PM

I think there s definitely something up with the right rail, as those two holes in the horizontal portion are for mounting the power switch, I believe. And that should be on the far left side, per assembly instructions. So as Steve mentioned, is it possible it was mispackaged with two of the same rail?

- Dustin

Not sure what the two holes on bottom of right rail are, but the power switch holes are on the left rail as expected.

- Zvonko

On second glance, I think those two holes on the bottom in your first pic are actually supposed to be vertically oriented to fasten the cross-bar on the right hand side of the saw. So have you tried flipping the right rail?

-- "Ladies, if your husband says he'll get to it, he'll get to it. No need to remind him about it every 6 months."

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics