LumberJocks

Reply by Nubsnstubs

  • Advertise with us

Posted on I need some crack advice

View Nubsnstubs's profile

Nubsnstubs

1749 posts in 2644 days


#1 posted 12-11-2018 04:52 AM

Rink, I wouldn’t use thin CA.Thick would be better because it takes a little long to cure. I use Titebond glue. Glue up the whole surface of the skewer, and try to get some glue into the hole from both ends, and then insert the skewer. Test fit it before you glue it up. Snug is good, with Titebond. If it goes partway, sand the skewer to allow a slip snug fit. ................... Jerry (in Tucson)

-- Jerry (in Tucson) www.woodturnerstools.com


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com