LumberJocks

Reply by therealSteveN

  • Advertise with us

Posted on Central machinery 30289 vs Delta bench top 6" jointer

View therealSteveN's profile

therealSteveN

2344 posts in 900 days


#1 posted 12-11-2018 04:19 AM


Not trying to do a commercial here but I highly recommend you take a look at the jointer knives at Holbren, https://www.holbren.com/high-speed-steel-jointer-planer-knife-sets/ . They are top quality and very affordable.

- syenefarmer

Grant said,

Unless you’re face jointing highly figured lumber i highly recommend you get some fresh knife and give it a run first before investing in a shelix head. I’ve never had my hands on that particular jointer but I assume it’s a Taiwanese clone and should work just fine.”

I agree x 2. Holbren knives before the Shellix, though if you get a Byrd from Brian at Holbren, just say the words “Woodnet discount” Brian can sell you a Byrd with the bearings cup from Byrd already pressed on, using something generic from HF could be using a great part, but mounting it on crap bearings, which could be problematic. That would only be AFTER you try the good knives to make sure it warrants throwing more cash at it.

-- Think safe, be safe


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com