Reply by Bill_Steele

  • Advertise with us

Posted on Parts/Accy's for Circa 1997 Jet JWTS-10JF

View Bill_Steele's profile


498 posts in 2063 days

#1 posted 12-06-2018 07:49 PM

I also have this same saw with stamped steel wings—so I am also jealous. I’ve had this saw for a little over 20 years and its still going strong.

I make my own inserts using 1/2” plywood.

I made my own mobile base.

If your saw does not have a link belt or a PALS kit—those are 2 worthwhile upgrades in my opinion.

Pay attention to the plug connection between the motor and the on/off switch. I’ve had problems in the past where the saw will not turn on or turns off quickly after startup and I found that this connection was vibrating loose.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics