Reply by trhoppe

  • Advertise with us

Posted on Cracks in the walnut of an end grain cutting board

View trhoppe's profile


9 posts in 663 days

#1 posted 12-04-2018 03:28 PM

Just another follow up.

I did use half of the pieces that did not have these failures to make an 18×13 board. It seemed the failures were exactly in the middle. So the end cuts came out right, and about 6-8” of the original board in the middle had these defects.

I also made a 2nd board, or at least the cuts for it, still gluing up on pieces as I have to do 1/2 at a time to fit through my planer, and I double/triple checked everything, and did a test through cut, and the new walnut looks perfect. No defects!

Thanks for all the lessons!

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics