LumberJocks

Reply by Jim Ganley

  • Advertise with us

Posted on Rikon 10-326 wandering/Flexing

View Jim Ganley's profile

Jim Ganley

54 posts in 4085 days


#1 posted 11-29-2018 04:40 PM

After posting I had to go and redo my set up although all seems to be OK on the setting up the blade and I did as Timber Wolf recommended to get the blade spot on. The first photo shows a 1/4” blade and it is backed into the slot in the bearing I am cutting Oak and it is wet and you can see the relation between the table slot and the board. I have to push this through at less than a snail’s pace and even then it will not track. All I use this Bandsaw for is mainly boxes. You Gentlemen have given me a lot of info for this weekend and I do appreciate it.

-- Jim - Cushing, WI


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com