LumberJocks

Reply by Robert

  • Advertise with us

Posted on Combination of BB Plywood and MDF for Router Table Top

View Robert's profile

Robert

3605 posts in 2091 days


#1 posted 11-28-2018 04:48 PM

I just built my 3rd router table top. That’s because of new routers/new inserts, desire for larger table.

I built everyone the same way: 2×3/4 MDF + laminate.

When you glue the MDF put on a flat work bench and use screws as “clamps”. When glue is dry remove screws. Edge with hardwood and LAMINATE BOTH SIDES & it will not sag – I promise!!.

Be sure to use the thicker horizontal laminate for countertops.

If you build a cabinet will have a cross brace on either side of the insert anyway if you’re worried.

-- Everything is a prototype thats why its one of a kind!!


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com