LumberJocks

Reply by Mike_D_S

  • Advertise with us

Posted on Combination of BB Plywood and MDF for Router Table Top

View Mike_D_S's profile

Mike_D_S

599 posts in 2815 days


#1 posted 11-28-2018 02:36 AM

Like any project, you simply need to reinforce where you expect the loads to be highest. You can check out my blog linked below for my DIY router table wing I built for my table saw.

I used 3/4 phenolic faced ply and simply reinforced across the bottom with a couple of strips of 3/4×1 1/2” oak strips. No sag after 3 years with the big PC router motor and a fairly heavy Jessem lift. The strips made a convenient place to attache the home built dust shroud that goes around the router motor.

Mike

My blog post

-- No honey, that's not new, I've had that forever......


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com