LumberJocks

Reply by Rich

  • Advertise with us

Posted on Rikon 10-326 wandering/Flexing

View Rich's profile

Rich

6156 posts in 1505 days


#1 posted 11-27-2018 08:03 PM

You don’t mention how thick the material is, or the TPI on the blade. I resaw on my 10-326 with zero drift. I have the saw perfectly tuned, square to the blade, and the fence is set parallel to the miter slot, which is also parallel to the blade. I’ve used a 2-3 variable tooth Timberwolf and a Woodslicer both 3/4”.

I’m sure the narrower blades you mention are higher TPI, which can cause real problems on thicker material since there are too many teeth in the cut and also the narrow blade can’t be kept as well stabilized to prevent twisting.

-- Half of what we read or hear about finishing is right. We just don’t know which half! — Bob Flexner


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com