LumberJocks

Reply by ChrisK

  • Advertise with us

Posted on combination outfeed table, assembly table, work bench

View ChrisK's profile

ChrisK

2042 posts in 3645 days


#1 posted 11-27-2018 01:49 PM

I used a piece of left over 1/2” MDF over 1/2” plywood to get about a 4’ x 5’ table set to the height of the saw table. I cut slots for the miter to slide into. Legs where made from left over 1/2” plywood as well.

My table, https://lumberjocks.com/projects/30415

If I were to do it over again I would use 3/4” MDF on top 3/4” plywood for more stiffness. I would also cut the over hang from 4” to about 2” again for more stiffness when I clamp things to edge of the table for sanding, cutting etc.

I covered the MDF with a couple of coats pf poly so my coffee spills would not damaged the MDF.

-- Chris K


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com