LumberJocks

Reply by canadianchips

  • Advertise with us

Posted on Insulating a Pole Barn

View canadianchips's profile

canadianchips

2632 posts in 3912 days


#1 posted 11-26-2018 11:51 PM

dakremer your pole shed has metal roof and walls ?
You are going to be dealing with condensation when you heat the inside, this will drip.
My suggestion is leaving an air gap between the tin and the insulation.
WET fiberglass batts have NO insulating value !
One option of doing this is make wafer insulation panels (much like they use in log homes with exposed rafters ! )
or
Rigid styrofoam comes in 4ft sheets.
My shop in Canada I had 8ft spaced rafters on a POLE SHED.. i I used 2ft x 8ft 2” rigid styrofoam. (The same panels they use here on the putside wall of houses or concrete basements) .I used 2 layers of 2” rigid . 1 layer horizontal between 8ft space. ,2nd layer the long way to cover seams.
On the walls I suggest an insulation that has foil on one side. It attaches like a bag,and its waterproof.
Unfortunately the insulation cost more than building the walls. I limped through part of the winter with nothing (In Canada its COLD in winter, spent half the time trying to heat the building so it was warm enough to play !)
BEST of luck in your building, !
Perry

-- "My mission in life - make everyone smile !"


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com