Reply by WoodenDreams

  • Advertise with us

Posted on Powermatic 15HH Snipe on both ends

View WoodenDreams's profile


883 posts in 518 days

#1 posted 11-23-2018 10:21 PM

Is there wood shavings under the board when feeding it in. A little upward pressure helps, as the board feeds in & out. if you have a short infeed or outfeed table, this is normal. A little lift at both ends make a difference, to take pressure off rollers. feeding in with no or little support puts pressure on the opposite rollers, the board tips upward into the cutting blades. this is why it’s a good idea to cut your boards a few inches longer or lift a little when feeding or exiting with longer boards then the feed tables. Then cut your boards to size after they’ve been run through the planner.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics