Reply by msinc

  • Advertise with us

Posted on Accuracy: Miter saw vs TS Miter sled

View msinc's profile


567 posts in 1352 days

#1 posted 11-20-2018 10:19 PM

This caught my eye recently, if you do a lot of frames it seems like a handy setup. Not a replacement for a sled or good miter gauge though

- GrantA

one of the better investments I ever made was the old cast iron guillotine trimmer.
if you plan to do much precise miter work, it is well worth checking into.



- John Smith

It’s the other way around…a miter or table saw, no matter what you do to it, is not a replacement for that tool. I also make a lot of picture frames {year around} and there is no way I would do it without a miter trimmer. I got mine from Rockler. It wasn’t exactly cheap, but it will make perfect miters every time. You still have to cut a 45 close to the length, you don’t use the trimmer to cut through a solid board at 45 degrees. It will shave a very thin “see thru” piece of wood off the frame or you can shave off like 1/8” if you have to, but it works better taking a little at a time.
One other suggestion is to make a framing table to glue the frames together…it is very easy and works way better than any store bought clamp set up.

Edit: one last piece of info, you really must make certain that you are working with dead perfect straight and square boards before you try to miter them into a frame. Any aspect of the wood that is not perfectly straight and dead perfect square will not result in a perfect miter.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics