LumberJocks

Reply by Jim Jakosh

  • Advertise with us

Posted on Dining Table Top Design

View Jim Jakosh's profile

Jim Jakosh

23740 posts in 3708 days


#1 posted 11-19-2018 09:35 PM

If this is to be a high quality heirloom type table, I’d start over with some 6 quarter lumber the full length and plane it to clean up at over 1” thick. But if this will be an everyday table maybe with a table cloth on it, you could do the breadboard in the middle and the ends but you will need some thick aprons the full length to carry the load across those center joints- like 1 ” x 3” stock Adding a piece under the top all around to give the appearance of thicker top will be a right thing to do for looks. Make the long ones full length and that will give you added strength on the edge.

My 2 cents worth…..........Cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com