LumberJocks

Reply by fivecodys

  • Advertise with us

Posted on Bosch/craftsman router mount?

View fivecodys's profile

fivecodys

1436 posts in 2053 days


#1 posted 11-06-2018 10:32 PM

Welcome to LumberJocks Mike.
The folks here are a great resource.
Pictures of your issue are always helpful.
I assume that there are mounting holes in the top of the router table?
Have you removed the plastic base plate off the router?

My set up is slightly different than yours (Porter Cable) but once I removed the base plate off the router I was able to match up the holes with the holes in the base plate with the holes in the router table top.

Mine had a few different patterns so that different makes of routers could be used.

I was not able to use the screws that came off the router. They were too short.
A quick trip to the hardware store fixed that problem.

I’m sure you already know this but slide the router out of the base when bolting it onto the table. It’s way easier that way.

I tried googling your set up and was able to find pictures of the router but not the exact table.

I hope some of this is helpful.

-- When you leave your shop for the night, make sure you can always count to 10.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com