Reply by shawnn

  • Advertise with us

Posted on Hold Down Options w/ no T-tracks

View shawnn's profile


146 posts in 1879 days

#1 posted 11-06-2018 01:27 AM

I cut these pockets using wood strips as a guide for my router, cutting with a (cheap, Yonico) guided bowl bit. Not sure if this is relevant to what you’re trying to do but I used masking tape on both the cutting board and the guide strips, then CA glue (super glue) to hold the guide strips in place. Holds the guides like a champ and when finished, the masking tape peels off cleanly.

ETA: I used to use double-sided tape but the foam carrier always allowed some movement. The masking tape doesn’t.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics