LumberJocks

Reply by MrUnix

  • Advertise with us

Posted on Just purchased a Delta 46-204 lathe

View MrUnix's profile

MrUnix

7451 posts in 2654 days


#1 posted 11-05-2018 09:16 PM

No need to pay for the manual… you can get it from Delta here:
Lathe Model 46-204 T1

I don’t have any experience with that particular lathe, but similar ones. Delta made some fine lathes, and that one should serve you well for years to come. It has MT2 tapers and a 1”x8tpi spindle, so you have pretty much unlimited access to accessories. Depending on condition, you may want to open up the headstock and replace the bearings just to be on the safe side. YMMV.

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com