Reply by goochs

  • Advertise with us

Posted on which diamond stones for chisels and hand planes blades

View goochs's profile


62 posts in 2148 days

#1 posted 10-28-2018 12:51 PM

I use to do stone, sandpaper, film and leather but after numerous cut fingers and more knowledge my system NOW consists of.
2 sided stone in holder..

then finish up on leather with black compound THEN green compound.

If I have a real bad nicked or out of square blade or chisel I will start with 80grit sandpaper on glass until very close then switch to the stone.

If I want a really really really sharp and shiney blade like on my smooter then after the stone I move to lapping films and do about 10 passes on 3 differnt grits which will give me one heck of a sharp blade.
sheetkit 1

these are cut in 3inch widths and are put on glass. They have a sticky back.

Got a new blade yesterday, took 10minutes to make a 5degree bevel, polish and test in plane.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics