LumberJocks

Reply by BattleRidge

  • Advertise with us

Posted on one 2x4 frame to rule them all (workbench design)

View BattleRidge's profile

BattleRidge

121 posts in 782 days


#1 posted 10-23-2018 09:08 PM

My combination workbench, assembly table, outfeed area is of a relatively simple design without a bunch of fancy joinery, primarily of 2” x 6” construction and screwed together with deck screws. The top consists of two layers of 3/4” plywood screwed together (no glue), and the work surface is a piece sheet of hardboard (that can be easily replaced when worn or damaged) that is held in place with double sided tape and a section of modified oak trim around the edges. The height is just beneath the top of my table saw (and a future upgraded table saw). The overall unit is 4’ x 8’ with a 30” x 30” drop down area that I use for my sander, portable router table, scroll saw (each of which stores in the workbench when not in use) and for other purposes. One side has shelving for handheld portable equipment and other items and I will be installing drawers on the other side for woodworking supplies, sandpaper, etc. The workbench is quite solid, sturdy and doesn’t budge while in use.

The designs you have posted should work and if screwed together (as I did mine) you can always disassemble and rebuild in the future if your needs change. I’m off to a meeting so have to be relatively short, but I’m sure you will get additional feedback here.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com