LumberJocks

Reply by lumbering_on

  • Advertise with us

Posted on Issue with router

View lumbering_on's profile

lumbering_on

578 posts in 974 days


#1 posted 10-23-2018 06:00 PM



I have a 1990s Freud plunge in my table and always set the bit by raising it to minimize backlash issues, then lock it. I also use a Wixey digital height gauge which is an awesome accessory.
I d assume the Triton has some backlash like all brands due, so suggest setting the height by always turning one direction (raising the bit makes sense because the router weight on the threads should minimize play), then lock it.
If the threads move while routing, it shouldn t be an issue with the mechanism locked.

- d38

I was wondering about this. I have it in my router, but it’s not exactly expensive. I’m a bit surprised the Triton has this issue as well. As with everyone else, I just make sure that I lower down to the desired height, and I have no issues after that.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com