LumberJocks

Reply by Andybb

  • Advertise with us

Posted on Jigsaw circle cutting jig fail - now need advice on spiral router bits

View Andybb's profile

Andybb

2024 posts in 1082 days


#1 posted 10-22-2018 06:55 PM

The Jasper jig is really designed to be used with the 1/4” bit it comes with. The angle is the issue. Two jigs come to mind. Some are here using a table saw. I used this to make a tapered circle and it worked just fine. The other would be to use a band saw circle jig with the table tilted but blade deflection is an issue with that setup too. (ask me how I know) The blade in the BS has got to be able to cut that radius without binding so that really onlt leaves you with a 1/4” or 1/8” blade. I’d try it with the table flat and if it works try tilting the table.

-- Andy - Seattle USA


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com