Reply by shawnn

  • Advertise with us

Posted on Cutting plywood...?

View shawnn's profile


145 posts in 1784 days

#1 posted 10-20-2018 12:10 PM

I made my own “track saw” out of my Makita circular saw. I made 4’ and 8’ plywood guides with miter tracks from Woodcraft set into dadoes then attached a 18” mating guide bar on the saw. I then used the saw in the tracks to cut the guides and this became the reference edge as with a track saw. I cut a rabbet on the opposite side for clamping to the sheet. This made the circular saw dedicated to this use. It works perfect, just have to remember to attach it to the cut piece or the cut will be off by the thickness of the blade kerf.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics