LumberJocks

Reply by Nubsnstubs

  • Advertise with us

Posted on gluing dowels

View Nubsnstubs's profile

Nubsnstubs

1749 posts in 2650 days


#1 posted 10-18-2018 02:02 PM

The glue is stronger than the wood. You didn’t say how deep the holes are, so here is how I do it. Squirt some glue into the hole. Run a pencil down into it to aid in coating the entire inside of the hole. Spread glue onto the dowel and then insert it into the hole. You might need a mallet to assist in persuading the dowel to go all the way through, so don’t have a dowel any longer that 1 inch of the hole.

If you haven’t already done this, try the fit of the dowels. If there is too much interference, sand them in a drill…

Don’t be concerned if you get glue on the surface as you’re gonna turn it off anyway. Good luck. ......Jerry (in Tucson)

-- Jerry (in Tucson) www.woodturnerstools.com


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com