LumberJocks

Reply by Mattg43

  • Advertise with us

Posted on How to move a 17" Grizzly G0513

View Mattg43's profile

Mattg43

27 posts in 962 days


#1 posted 10-18-2018 12:23 AM

I bought mine from a gentleman about 200 miles away as well. I borrowed my dads pickup (5.5’ crew cab) and we took the table off the saw, then put its spine against the tail gate. Then the two of us picked it up from the bottom, letting the tailgate support it as it went backwards, each of making sure it did not tip to one side or the other.

I had some 2x material I used to “shim” it in place (on either side of the eye bolt at the top, at the top and bottom sides so that it rode against the wheel well (other stuff in the bed as well), then tied it down and with a strap around the base keeping it from sliding out backwards.

No problem at all with it riding home that way at 75mph, and unloading at home was a very similar affair.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com