Reply by IsaacJames

  • Advertise with us

Posted on Necessary to veneer both sides of a 1-1/2” thick laminated plywood substrate?

View IsaacJames's profile


6 posts in 745 days

#1 posted 10-15-2018 05:09 PM

Hey Nathan, As I stated in my second question on this thread, I’m considering ripping the top sheet of 3/4” plywood into strips that match the veneer I’m applying to them. This would prevent having to glue two full sheets of plywood together and creating the issue that you’re concerned about.
Here is a screenshot of my SketchUp drawing to help visualize what it is I’m building if you all think that’ll help. The veneered pieces are the 10 interior boards and center cross piece. The 2 outside edges and the breadboards will be solid wood.


-- | Measure Once, Cut Twi |

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics