LumberJocks

Reply by ArtMann

  • Advertise with us

Posted on Drum Sanders

View ArtMann's profile

ArtMann

1462 posts in 1420 days


#1 posted 10-15-2018 12:09 AM

I use my Jet 16/32 to sand CNC carving plaques to a very consistent thickness and it works very well for that. I have found you can take about 0.015” off at a time with 80 grit. That is about 1/64 inch. My machine is a newer model and the conveyor will slow the feed rate down rather than stall. I very seldom adjust the tracking. It is good if you understand its limitations.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com