LumberJocks

Reply by Lazyman

  • Advertise with us

Posted on Opinions: SHOP FOX Oscillating Benchtop Drill Press 13in. Model# W1668

View Lazyman's profile

Lazyman

4485 posts in 1991 days


#1 posted 10-10-2018 01:29 PM

I’ve got one that I bought that was practically new at a discount off of craigslist about 4 years ago. It seems to work just fine though I don’t know if there will be some sort of issue over the long term. Hopefully they used bearings with a higher radial (?) rating to mitigate that. If they can make a bearing for a roller blade that can handle the sort of stresses they get, surely they can put a bearing in there that can handle a little side pressure. It is not like you need much that pressure to sand.

If you don’t have room or a budget for a dedicated oscillating sander, this is a nice compromise. The built in dust collection port for sanding is actually pretty effective.

-- Nathan, TX -- Hire the lazy man. He may not do as much work but that's because he will find a better way.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com