LumberJocks

Reply by tyvekboy

  • Advertise with us

Posted on Contact Cement and MDF

View tyvekboy's profile

tyvekboy

2045 posts in 3861 days


#1 posted 10-09-2018 01:49 AM

Just a tip I learned when working with contact cement. After you get the contact cement spread on both surfaces, use a piece of TYVEK as a slip-sheet. Just place it on one of the glued surfaces.

This will allow you to position it where you want before you pull out the slip-sheet. Based on what you are doing, I would use strips of TYVEK. Then you can pull the slip-sheet of each side of the square frame out after positioning it.

Hope this helps.

-- Tyvekboy -- Marietta, GA ………….. one can never be too organized


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com