LumberJocks

Reply by ocean

  • Advertise with us

Posted on Jet Pro Shop Table Saw Arbor Not Spinning

View ocean's profile

ocean

190 posts in 1374 days


#1 posted 10-01-2018 06:33 PM

If all the above problems have been eliminated then I would say that the 2x material is pinching the blade enough to stop the blade and arbor. This is not all that uncommon with 2x material. As you cut the tension in the wood is released pinching the blade. Tighten the arbor nut and spread the saw kerf cut with wedges about every foot or less to prevent the pinching problem. You will likely need a second person to insert the wedges as you go. Be careful not to come close to the blade.

-- Bob, FL Keys


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com