LumberJocks

Reply by Riggy

  • Advertise with us

Posted on Butcher Block Install: Corner Gaps :: Help Needed

View Riggy's profile

Riggy

37 posts in 353 days


#1 posted 09-27-2018 02:21 PM



Normally I would scribe the top. But check the front overhang on all tops before you make the decision. If you take 5/8” out of one, will it pull it back to the front of the cabinet? I would hate to go to all that work and then the drawer tops are visible.

With those wide gaps and a wood top, I would scribe filler pieces using the same material/color in 4/4 material.

Good luck

- rcs47

This is my thoughts exactly. There’s also the concern of (even if it was a smaller piece and easily removed etc.) reciprocal loss of overhang on the front end after scribing, to me, given that there’s gaps of just under 1/2” moving all the way up to 3/4” in one spot, wouldn’t this just look bad taking away so much overhang from scribing at that point?


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com