LumberJocks

Reply by 000

  • Advertise with us

Posted on Best way to rout stopped sliding dovetails

View 000's profile

000

2859 posts in 1226 days


#1 posted 09-24-2018 03:21 AM

The picture is only conceptual, there are lots of things missing. :)

Below is a picture of a jig Jbay posted. What I don t see is an indexing stop for the drawer front edge. Easy enough after you get the distance from the edge of the drawer front to the outside edge of the drawer side. Do one side only on all fronts, and when done, set up the block at the same distance for the other side. Rout all, then route the bottom groove.

Another thing not shown and needed on the jig is something to hold the front securely while routing the dovetails. De Sta Co is a manufacturer of Toggle Clamps??. I ve only known them as De Sta Co clamps, but I see them in woodworking links and books. Easily available.

Jerry (in Tucson)

- jbay

- Nubsnstubs



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com