LumberJocks

Reply by EdsCustomWoodCrafts

  • Advertise with us

Posted on Template Routing

View EdsCustomWoodCrafts's profile

EdsCustomWoodCrafts

932 posts in 2189 days


#1 posted 09-23-2018 11:11 PM



A 2-inch bit doesn t extend beyond the template bushing? I think you re not getting the full-depth plunge from your router.

But, yes, a straight bit will do it. How deep are you trying to go? A very shallow recess will keep the stones from sliding around (a cleat on top of the surface might be easier to do and make it easier to clean up the sharpening sludge)

- jerryminer

You may be right I need to check, I tkiught about a cleat but thought it would be cool to try recessing as I have never done it before… I’m hiding a scrap piece of oak I have lying around . As for the depth probably less than 1/4” deep

-- Thanks Ed “A bad day woodworking is better than a good day working. ~Author unknown” . Come check out my website for more about what I make and how at www.edscustomwoodcrafts.com


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com