Reply by John Smith

  • Advertise with us

Posted on Scrollsawing Brass?

View John Smith's profile

John Smith

1797 posts in 526 days

#1 posted 09-19-2018 06:53 PM

Bill, 3M-77 is a bit aggressive when sprayed in thick films, but is ok with light passes.
I also use LOCTITE High Performance “200” which is a medium-firm tack.
just experiment with any of the above suggestions and see what works best for you
in your projects and fine-tune it from there.
most everyone here has their favorite products or methods of doing things and that
is because they have tried the different things and found what works best for them.
there is nothing wrong with thinking outside of the box, and is often recommended.
looking forward to seeing your completed project



-- Failure is proof that you at least tried ~ now, go do it again, and again, until you get it right --

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics