LumberJocks

Reply by knotscott

  • Advertise with us

Posted on Grizzly 1023SL Rail Extended

View knotscott's profile

knotscott

8409 posts in 4382 days


#1 posted 09-08-2012 02:11 AM

Kevin – That extra capacity should come in handy….well done! I’ve done something similar….36” is about all my little shop can handle, but it’s a nice size. I’ve got a Shop Fox W1677 that’s essentially the same as the G1023SL… I was able to move the front rail by the distance of one bolt hole cantilevered 10” further on the angle bracket….the bracket remained untouched in it’s stock setup, and I bolted the rail down to it with one less bolt….no drilling.

David – If you slide the rails right, you loose left side capacity….not a problem for a left tilt saw, but could be something you’d miss on a right tilt saw.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com