LumberJocks

Reply by Ceasar2017

  • Advertise with us

Posted on Another project - need advice.

View Ceasar2017's profile

Ceasar2017

10 posts in 877 days


#1 posted 08-23-2018 04:46 PM

To give you guys an update:

1. I decided to go with 48×48 plywood sheets for 1 unit. which means the walls would be 1/2” x 2 48” tall and top same and bottom probably 3/4×2. which should be that 48” + 3” + 6” wheels total height. width will also be 48” with middle being braced by a 3/4” splitting into 2×23”. Horizontal will be 1 middle shelf and 2 adjustable. Bottom, i am not sure if I want to do lattice, i think it’s prob a good idea though.

2. for connects, I want to use prob grk 2 1/2” cabinet screws and titebond 2 or 3 glue.
3. my biggest q is the doors. my friend is trying to push me towards something premade, even something on a track or something thats much nicer than we can make… do you guys have any advice or ideas? especially if premade. I want to ideally have 2×24 opening doors but not completely ruling out other ideas

the second cabinet will be much taller, probably 66/68” tall. I need to be below 76” for total height. rest similar but using cut 96” plywood, which probably be a bear to work with.

tia :)


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com