Reply by Fresch

  • Advertise with us

Posted on Powermatic 66 table saw 5hp 1 phase On/Off

View Fresch's profile


452 posts in 2432 days

#1 posted 08-22-2018 01:44 PM

See in your picture 3rd frame right side wiring diagram, point#3. The left side push button is the start, the right side is the stop, under the start see the open contact? When you push start the power flows through the stop to the coil of the starter, on the starter is that normally open contact (probably on on side or other) that has to close when the magnet pulls in the 240v power to the motor, when it closes it bypasses the on switch and keeps power flowing to the coil of the starter. See your “B” and “F” it looks like it should be wired “B” to “A”. Need a better picture.
But you can use a continuity tester/ohm meter and follow the wiring diagram with the he power off.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics