LumberJocks

Reply by Nubsnstubs

  • Advertise with us

Posted on Delta 1460 wood lathe

View Nubsnstubs's profile

Nubsnstubs

1612 posts in 2210 days


#1 posted 07-17-2018 02:08 PM

I believe all the old Delta tailstocks were custom fit to each headstock. But, if the ways are the same width, and the tongues on the tailstock are a match, try it.

I have one like that, can’t tell what the model really is as it didn’t stamp the first digits/numbers. All I see is the #60 where the model box is. The tailstock that came with it wasn’t the right one, but I got it right on the center line.
I then got a Rockwell 46-450, and tried to use the tailstock, but it was about 1/16” off. It was dead center on the 46-450.

What is the serial number on your lathe? ................. Jerry (in Tucson) www.woodturnerstools.com

-- Jerry (in Tucson) www.woodturnerstools.com


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com