LumberJocks

Reply by MrRon

  • Advertise with us

Posted on Leg Fabrication

View MrRon's profile

MrRon

5625 posts in 3694 days


#1 posted 07-10-2018 06:35 PM



Wow, I don t understand this at all. Why are you gluing that from four pieces, and what s with the rabbets? More info please.

- pintodeluxe


The rabbets are for the front, back and side panels of the bench; all of which are 3/4” thick. This is the only way I can get the 2-1/4” dimension I want. I intend to rip 3/4” wide strips from 2×12 lumber and glue them up as shown. Once glued, I will then cut the 3/4” wide by 3/8” deep dado’s to accept the 3/4” panels. I hope this explanation is clear.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com